Cutting the dados
The finished furnace cabinet in position.
The air conditioner installed
That should keep us cool.
Working out the air flow.
Gotta blow all that hot air out the side.
This baffle should work.
View from the top
View from the front.
The cushions fit well.
Headliner is installed
The bend looks pretty nice
You can see the slight bend of the profile in this picture.
View from outside the door
These 2x2 sure are strong. Heavy too!
Built like a tank.
Glued and screwed
More screws
Working on the inside skin
Staples work fine in this application.
Another view of the spars.
More spars.
Installing spars. Notice the 14 1/4" opening for the roof vent?
A pile of spars.
The next piece of headliner is in.
Staples, staples and more staples.
The lower skin is in.
Don't even ask. I can't remember.
Dragged it outside to see what it looks like in the daylight.
The a/c venting.
I hope that's enough room
The counter is in.
97-128 (of 243 found)
97-128 (of 243 found)